Version 9 of the Data Security and Protection Toolkit is open. What changed for care homes, dentists, pharmacies and IT suppliers, the evidence to gather, and a month-by-month plan to the deadline.
Facts as of 16 November 2026, checked against NHS England's v9 workbooks (v1.1).
The Data Security and Protection Toolkit for 2026-27, version 9, is open. The deadline is Wednesday 30 June 2027.
If you run a care home, domiciliary care agency, dental practice or pharmacy, you have probably seen the headlines: 49 outcomes instead of 47, aligned to the Cyber Assessment Framework (CAF) v4.0. They mostly describe a toolkit you will not fill in. This guide covers what actually changed for Category 3, the evidence to gather, and a month-by-month plan so June is a formality, not a fire drill.
There are really two toolkits, and v9 changes them differently.
The CAF-aligned DSPT is used by NHS trusts, ICBs, arm's-length bodies, CSUs, independent providers designated as operators of essential services, and genomics organisations. This is the one in the headlines. NHS England's v9 change log shows it has moved from CAF v3.2 to CAF v4.0, with three new outcome references:
C2.b Proactive attack discovery no longer appears as an outcome of its own. There are also new or tougher policy requirements, covered below.
The Category 2, 3 and 4 toolkit is the assertion-based version, built on the National Data Guardian's ten data security standards. Category 3 covers dentists, local authorities, opticians, pharmacy, social care, universities and “others”. This toolkit does not use the CAF outcomes. What has changed is the evidence items under its assertions.
One summary of v9, from the IT security firm ITHealth, describes the overall direction as “greater operational maturity and continuous assurance”: showing controls work, not just that they are written down. The new Category 3 items point the same way.
NHS England's v9 workbook (v1.1) lists these changes for Category 3.
Two new sub-categories. Category 3a is for CQC Market Oversight providers, the largest social care providers. Category 3b is for local authorities. Each gets one item of its own:
Four new evidence items for Category 3. None of them is marked as required to meet the standard this year, but each is worth answering properly:
Reworded items. Sixteen existing items have updated wording or tooltips, including the asset register and ROPA (1.1.2), privacy notice (1.1.3), policies (1.3.1), lost devices (1.3.14), business continuity (7.1.2), backups (7.3.1) and 10.2.1. Re-read last year's answers against the new wording rather than copying them across.
Version 1.1 of the workbook, logged on 2 October 2026, updates evidence item 10.2.1 for Categories 3, 3a, 3b and 4. It is a mandatory item, and the question reads: “Does your organisation assure that your IT system suppliers have robust cyber security arrangements?”
The tooltip makes clear this covers your IT support company as well as your system suppliers. It lists suitable assurance as:
If a supplier holds none of these, explain what you do instead. In practice, “our IT company is very good” will not answer 10.2.1. A dated record of which certificate you checked, where and when will.
If you supply IT to health and care, your v9 toolkit has its own changes. Category 2 organisations get new product and service questions. For each product or service, you are asked about documented security controls aligned to the supplier charter, vulnerability management, access control, incident management and whether you have completed a DTAC assessment.
Item 9.5.10 asks whether you have signed the Supply Chain Charter, and existing items such as MFA or identity federation in supplied software (4.5.6) still apply. IT suppliers also have their own list of mandatory audit areas (DSPT News item 170).
Most v9 coverage focuses on five themes. Here is where each applies, and what a care provider should do.
Multi-factor authentication. For CAF-aligned organisations, the policy requires strong MFA on all remote user access and on privileged access to externally hosted systems. For Category 3, item 4.5.3 is mandatory: MFA on all remotely accessible and privileged accounts, with exceptions only as approved by your board or equivalent senior management. Check email, your digital care record, rostering and cloud systems, and record each exception and its approver.
Detection and response. The CAF-aligned toolkit has a mandatory extended detection and response policy, covering endpoint (EDR) and identity (ITDR) criteria. It is not a Category 3 evidence item. The care-provider equivalents are up-to-date antivirus on every device (6.2.1, mandatory) and, if you can manage it, registering for the NCSC Early Warning service (8.3.8).
Unsupported operating systems. CAF-aligned organisations report the percentage of desktops, laptops and servers on supported operating systems. For Category 3, 8.1.4 and 8.2.1 are mandatory. Confirm every system is still supported, including care planning, rostering and eMAR software. Where something is not, document the risk of carrying on, your reasons, and what you are doing to reduce it.
Cyber-alert acknowledgement. Under the CAF-aligned toolkit, high-severity NHS cyber alerts must be acknowledged within 48 hours for alerts issued up to 31 December 2026, and within 24 hours for alerts issued from 1 January 2027. The decision to act must be confirmed within 14 days, falling to 48 hours from 1 January 2027. For Category 3, the related item is 6.3.1, on whether any incident was caused by a known issue or vulnerability. The practical lesson is the same: know who gets the alert and who decides.
Post-quantum planning. CAF-aligned organisations must submit an approved and realistic plan to meet the NCSC's 2028 milestone, which means a discovery exercise and an initial migration plan. This does not appear in the Category 3 workbook. A sensible care-provider step is to ask your IT suppliers what their plan is, and record the answer alongside your 10.2.1 evidence.
Seven months is plenty if you spread the work out. Here is a sequence that fits a small care or dental team.
November 2026. Download the v1.1 Category 3 workbook and confirm your category: 3, 3a or 3b. Confirm who has overall responsibility for data security and protection (1.1.5). Bring your registers up to date: the information asset register and ROPA (1.1.2) and the digital asset register (7.1.1). Social care providers can get free support through the Better Security, Better Care programme. NHS England's monthly webinars for dentists, local authorities, opticians, pharmacies and others run from Tuesday 17 November 2026 to June 2027.
December 2026. Ask your IT support company to confirm in writing what is unsupported (8.1.4), and take any risk decision to your management meeting (8.2.1). Review MFA across every internet-facing system (4.5.3) and record approved exceptions. Check device encryption and lost-device procedures (9.5.2, 1.3.14). If anyone travels abroad with work devices, write the short policy that 1.3.15 asks for.
January 2027. Work through your suppliers. Update the supplier list (10.1.2) and run the 10.2.1 certificate checks, recording dates. Cover non-IT suppliers on site (10.2.6) and any processing outside the UK (10.2.7).
February 2027. Training. Refresh the training needs analysis (3.1.1), track completion against the 95% target (3.2.1), and record role-appropriate training for the people responsible for data security (3.4.1).
March 2027. Business continuity. Update the plan so it covers data and cyber security (7.1.2), and run a tabletop exercise with named actions and owners (7.1.7, 7.2.1, 7.2.2). Test a backup restore (7.3.4) and keep an up-to-date copy of your emergency contacts separate from your computer (7.3.2).
April 2027. Incidents and learning. Review breaches and near misses, the process reviews behind them, and the senior oversight of actions (5.1.1, 5.2.1, 6.1.1 to 6.1.3). Carry out your checks of compliance against your own policies (1.3.2).
May 2027. Do a full read-through. Every mandatory item should have an answer, a named owner and evidence you can find in under a minute. Get management sign-off.
June 2027. Publish early in the month. Do not leave it to Wednesday 30 June.
The DSPT is rarely hard because of the questions. It is hard because the answers live in the IT company's inbox, a training spreadsheet, a supplier folder and someone's memory, and get rebuilt every year.
PICMS is built to stop that. The PICMS healthcare pack covers CQC and NHS DSPT alignment, and the core modules hold the evidence the toolkit asks for:
Supplier assurance, training and incident learning also feed CQC and ISO 27001, so one evidence trail can serve all of them.
Software will not run your tabletop exercise or chase a supplier's certificate. You still complete and publish the toolkit yourself at dsptoolkit.nhs.uk. What PICMS removes is the June scramble for evidence you already had.
Want to see how your DSPT evidence, CQC evidence and supplier checks look in one place before the deadline closes in?
Watch the demo, or book a 30-minute walkthrough with Jason to see the healthcare pack against your own requirements.
If you also hold or are planning ISO certification, take the free gap check. The questions are plain English and reviewed by an auditor, and you see the full result on screen before we ask for anything. There is no DSPT version of the gap check.
PICMS supports audit and assessment preparation. It does not replace your own DSPT submission, independent audit or advice from NHS England or your commissioner. Always check requirements against the current toolkit at dsptoolkit.nhs.uk.
See how policies, supplier checks, training and incidents sit in one place in the PICMS healthcare pack.